Gigabit PoE+ Injector Adapter – Converts Non-PoE to PoE | IEEE 802.3af/at, Delivers 15.4W / 30W Ethernet Power, Plug & Play, Up To 328ft (100m), for IP Cameras, VoIP Phones & More

Product description

Product Specifications

Brand Name ThePoEstore Pass Through Data Rates 10/100/1000Mbps Transmission Distance Up to 100 meters (328 ft) Power Pin Assignment 1/2 (-),3/6(+) AC Input Voltage 100 to 240 V AC Frequency 50 to 60 Hz AC Input Current 0.5A 100 to 240 V Output Port Power Voltage 48VDC Output Port Power 15.4W / 30W Connectors Shielded RJ-45, EIA 568A and 568B Protection Over current protection/Over load protection Protection Over voltage protection/Anti-interference protection Operating Ambient Temperaturey 0 to 40°C Operating Humidit Maximum 85%, Non-condensing Storage Temperature -10 to 40°C Storage Humidity Maximum 90%, Non-condensing

Convert Non-PoE to PoE Instantly – Upgrade your existing non-PoE switch/device effortlessly with the PoE-M911-N-W injector—no replacement needed
Gigabit Speed Performance – Enjoy blazing-fast wired connections with 1× Gigabit input and 1× Gigabit output port for seamless data transfer
802.3af/at PoE Compliant – Power and data delivered over a single Ethernet cable, ideal for IP cameras, access points, and devices in power-scarce areas
Extend Up to 100m (328ft) – Perfect for large deployments, delivering stable power and data to remote devices like cameras or APs
Auto-Detect Power Delivery – Smartly supplies up to 30W for PoE+ devices while staying backward compatible with 15.4W 802.3af devices, Integrated power supply
Plug & Play Setup – Hassle-free installation—no software or configuration required, just connect and go
Tips: 1. This product only supports PoE devices and PoE cameras, and does not support cameras with separate data and power supply 2. The product lights up green after power is turned on, and it is normal for the red light to turn on when outputting load 3. Please note that your equipment power requirement should not exceed 30W when making a purchase